Mactac Vehicle Wrap Bundles

Mactac Gruv Slideable

Designed for speed and ease of application, the new product features a highly conformable 2.0 mil gloss white
cast vinyl. The film is coated on one side with a low initial tack and permanent gray block-out acrylic adhesive that is
slideable and repositionable. A primer is used to enhance the adhesive anchorage to the film for clean removability.
It offers superior performance on complex curves, recesses, and riveted surfaces. The repositionable adhesive is
accompanied by a 90# polycoated micro-channel, air-egress slideable liner. The micro-channels imparted into the
adhesive allow a bubble-free installation without showing through the film.

Features and Benefits

Full or partial wraps on vehicles, fleets, buses, recreational vehicles, watercraft, and trailers
Designed for ease of use and application speed, the repositionable adhesive is accompanied by a 90# polycoated
micro-channel, air-egress slideable liner.
The micro-channels imparted into the adhesive allow a bubble-free installation without showing through the film
It can be used for long-term outdoor signage and other applications that require conformability and durability
It is compatible with wide-format solvent, latex, and UV-curable inkjet printers and can be sheeted for UV offset
and screen printing
Covered by Mactac Open Image WarrantySMDurability
Film durability up to 10 years for unprinted, no overlaminate and applied to a vertical, flat surface.
Use-life estimate based on accelerated age studies on vertical applications under “normal” environmental conditions.
Severe environmental conditions will reduce life expectancy.
Recommendations are believed to be accurate but do not constitute a warranty written or implied.
Refer to Mactac® Product Performance Guides and Technical Assistance Bulletins prior to use. Visit mactac.com to download.
Compatibility
Rayzor™ LF3648 Optically Clear Gloss, LF3648G Clear Gloss, LF3638 Matte Overlaminate